Dintek PowerMAX+ Cat.6A S/FTP Patch Cord (1201-06036, 2m)

Trang Chủ >> Cáp mạng và phụ kiện >> Cáp-phụ kiện Dintek >> Dintek PowerMAX+ Cat.6A S/FTP Patch Cord (1201-06036, 2m)
Mã số:11032498
Dintek PowerMAX+ Cat.6A S/FTP Patch Cord (1201-06036, 2m)

Dintek PowerMAX+ Cat.6A S/FTP Patch Cord (1201-06036, 2m)

Part Number: 1201-06036

- Dintek PowerMAX+TM Shielded Foil Wrapped UTP Patch Cords are key components of the PowerMAX+TM S/FTP end-to-end solution. They are specifically designed to support high speed data networks for 10-Gigabit Ethernet applications and are fully tested to meet ANSI/TIA-568.2-D Cat.6A channel requirements. The patch cables are made from high quality shielded four pair 26AWG stranded wire.  

- Dintek PowerMAX+TM patch cords are pre-terminated with RJ45 shielded plugs and feature anti-snag strain relief boots. Dintek recommends the entire range of PowerMAX+TM shielded products be used in an end-to-end system to maximize cabling performance.

- Jacket Type: PVC.

- Color: Gray.

- Length Qty: 2m.

Features

- Component level performance

- Molded boots prevent pin from bending and cables from kinking

- Stranded wire provides maximum flexibility

- Fully tested to meet ANSI/TIA-568.2-D Cat.6A requirements

- The mechanical characteristics and transmission performance meet 10GbaseT Ethernet, 16Mbps token Ring, 10Base-T, 100BaseT, 155Mbps, 622Mbps ATM, Gigabit-Ethernet and 1.2Gbps ATM

Applications

- 10GBASE-T Ethernet

- 100BASE-TX Fast Ethernet

- 1000BASE-TX Gigabit Ethernet

- 1000BASE-T Gigabit Ethernet

- 10BASE-TX Ethernet

- ATM CB1G

- 155/622 Mbps ATM

- 100 Mbps TP-PMD

- 100VG-AnyLAN

- 4/16 Mbps Token Ring

- Voice

Standards Conformance

- UL Listed

- Meet Cat.6A channel performance for in ANSI/TIA-568.2-D

- CENELEC EN 50173-1, CENELEC EN 50288-10-1

- ISO/IEC 2nd Edition 11801 Class EA

- RoHS-6 Compliant

Thông số kỹ thuật

Cable Construction
Conductor
Material Stranded Anneal Copper Wire
Wire Size 26AWG
Insulation
Material Foam-PE
Diameter 1.05±0.05mm
Colors Blue/White-Blue | Orange/White-Orange | Green/White-Green | Brown/White-Brown
Drain Wire 26AWG Tinned Copper
Jacket
Material PVC
Diameter 6.0 ±0.2mm
Colors Gray
Foil Material Aluminum Mylar (Aluminum inward) per pair
Foil Coverage 100% coverage with 25% overlapping
Shielding Material Tinned Copper braid
Shielding Coverage Tinned Copper braid
RJ45 Plug
Plug Type Shielded RJ45 plug
Contact Material Copper alloy 50u” gold plated over nickel
Strength 20lbs. min
Durability 750 cycles min.
Wiring schemes T568B (or T568A on request)
Electrical
Impedance 15Ω/100m at 20℃
Capacitance Unbalance Pair to Ground 330pf/100m Max
D.C.R (Max.) 14.8 ohm/100m at 20℃
DC Insulation Resistance 1500MΩ/100m min.
Resistance Unbalance 3% Max/100m
Giá: Vui lòng gọi (Đã bao gồm VAT)

Số lượng :

Thêm vào giỏ Mua ngay


Chia se tren Facebook
Sản phẩm liên quan

Tel:(028) 7300 1535
Showroom:92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM
Website:www.sieuthivienthong.com
Email:info@sieuthivienthong.com