Hỗ trợ kinh doanh

Ms. Linh: 0918 489 013
Ms. Lê: 0916 514 469
Ms. Tuyết: 0915 762 088
Ms. Quỳnh: 028-7300 1535
Ms. Thảo: 028-3588 6355
Ms. Vân: 0914 801 001
Ms. Nhi: 0918 891 771

Chăm sóc khách hàng

0916 287 068

Công tắc cảm ứng hiện diện THEBEN compact passage KNX

Trang Chủ >> Báo cháy-Báo trộm >> Công tắc cảm ứng THEBEN >> Công tắc cảm ứng hiện diện THEBEN compact passage KNX
Mã số:13130130
Công tắc cảm ứng hiện diện THEBEN compact passage KNX

Công tắc cảm ứng hiện diện THEBEN compact passage KNX

- Presence detector (PIR).

- Mixed light measurement.

- Square detection area for corridors.

- Two outputs light for controlling two lighting groups.

- Switching or constant light control.

- Choice of fully or semi automatic operation.

- Presence output for HVAC control with switch-on delay and switch-off delay.

- Room monitoring with selective movement detection.

- Integrated bus coupling.

- SendoPro 868-A service remote control (optional).

- Clic user remote control (optional).

- The switching behaviour of the presence detector is controlled by presence and light, or as required in switching or constant light control operation modes.

- In the 'switching' operation mode, lighting switches on with darkness and presence and off with sufficient light or when nobody is present. In the 'constant light control' operation mode the sensor controls the artificial light daylight-dependent on a constant lighting level.

- The self-learning switch-off delay time adjusts to occupants' behaviour.

- Fully or semi-automatic: In 'Fully automatic' mode, the lighting switches on and off automatically according to presence and light In 'Semi-automatic' mode, it must be switched on manually and it switches off automatically.

- Manual override: Lighting or dimming can be manually controlled at any time.

- The presence detector has a mixed light measurement and is suitable for controlling the following types of lamp: LED, ESL, fluorescent lamps (FL/PL), halogen and incandescent lamps.

- Presence output for HVAC control: Switching behaviour is only controlled by presence.

- The switch-on delay prevents instantaneous switch on. The presence output only switches after the delay is completed.

- The monitoring output works with reduced sensitivity and indicates the presence of persons with a high level of accuracy.

- The brightness output makes the light information available for visualisation purposes.

- Master/slave parallel switching: Several detectors can be connected with each other to increase the detection area. The master controls lighting and HVAC. All other detectors merely provide presence information as slaves.

- Master/master parallel switching: Several detectors can be connected with each other to control several lighting groups. Every master controls its lighting group according to its own brightness measurements. Presence is detected by all the detectors.

- Master or slave operating mode is selected via configuration.

- Test operation mode checks the detection area and configuration.

- A maximum of 10 detectors can be switched at the same time.


Model compact passage KNX
Operating voltage KNX Bus voltage, ca. 8 mA
Installation height 2 – 6 m
Setting range brightness  10 – 1500 lx
Detection angle 360º
Type of connection KNX bus terminal
Installation type Ceiling installation
Light switch-off delay 30s – 20min
Lamps Incandescent/halogen lamps, fluorescent lamps, Energy saving lamps, LEDs
Light measurement Mixed light measurement
Stand-by time light 0s – 60 min
Presence switch-off delay 30s – 120 min
Switch-on delay presence 0s – 30 min 
Ambient temperature 0°C … +50°C
Color Pure white (similar to RAL 9010)
Type of protection IP40

- Hãng sản xuất THEBEN của Đức.

- Bảo hành: 12 tháng.


Giá: Vui lòng gọi

Số lượng :

Thêm vào giỏ Mua ngay

Chia se tren Facebook
Sản phẩm liên quan

Tel:(028) 7300 1535
Showroom:92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM