Compression Driver Electro-Voice ID60DT
- The Electro-Voice ID60DT Compression Driver is a 60-watt, heavy-duty driver for re-entrant horns. This driver is designed for use in applications that require continuous, high-level, acoustic output such as high-level public address.
- The ID60DT is a 60-watt, heavy-duty driver for re-entrant horns. This driver is designed for use in applications that require continuous, high-level, acoustic output such as high-level public address. The ID60DT features rugged, weather-resistant, phenolic diaphragms, indoor and outdoor packaging, and a 1“, screw-on exit.
- The ID60DT is heavy-duty compression driver for use in high-power public address installations. The driver employ rugged phenolic diaphragms, 2-inch diameter voice coils and “rim centered” ferrite magnet structures for long life and reliability under extreme operating conditions.
- A hinged cycolac rear housing for easy access and connection to a sound system, via a BX conduit connector, is provided together with a plug-in, field replaceable diaphragm assembly.
- The transformer model (ID60DT) includes connections for 25-V and 70-V distributed systems and a screwdriver operated power-tap select switch. The exterior is finished in durable, weatherproof paint and all metal parts have been tropicalized for resistance to high humidity and fungus.
- Ideal for both indoor and outdoor applications, these drivers are well suited for any installation requiring rugged, high-power performance.
- 60-watt driver for reentrant horns.
- Rugged, weather resistant phenolic diaphragms, indoor/outdoor packaging.
- 1-inch screw-on exit.
- 25/70.7-volt transformer with 1.88-, 3.75-, 7.5-, 15-, 30- and 60-watt taps.
- Rugged diecast housing with weatherproof finish.
Specifications
| Model | ID60DT |
| Frequency Response | 300 - 4,000 Hz ±5 dB |
| Power Handling, 8 Hours, 6-dB Crest Factor | 60 watts (500-5,000 Hz pink noise) |
| Impedance | Nominal: 8 ohms Minimum: 7.5 ohms (Cobraflex Horns above 500 Hz) |
| Voice Coil Diameter | 5.08 cm (2.0 in.) |
| Magnet Material | Strontium ferrite |
| Flux Density | 1.17 Tesla |
| Construction | Rugged diecast housing with weatherproof finish for outdoor use |
| Mechanical Construction of Driver | 1 3/8'-18 thread, 1/2 long allows the ID60 to be mounted onany University Sound horn |
| Recommended Horns | Cobreflex IIB, Cobreflex III, PH, 2WP, SMH, SH |
| Magnet Weight | 1.06 lbs (0.48 kg) |
| Dimensions (Diameter x H) | 5.6' (14.3 cm) x 6.4' (16.2 cm) |
| Net Weight | 7.4 lbs (3.4 kg) |
| Shipping Weight | 7.9 lbs (3.6 kg) |
- Sản xuất tại Mexico.
- Bảo hành: 12 tháng.
