480W 24VDC DIN Rail Power Supply Unit D-Link DIS‑N480‑24
- Universal AC input/ Full range
- Built-in active PFC function
- Protections: Short circuit/ Overload/ Over voltage/ Over temperature
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508 (industrial control equipment approved
- EN61000-6-2 (EN50082-2) industrial immunity level
- 100% full load burn-in test
Specifications
| Model | DIS‑N480‑24 |
| OUTPUT | |
| DC VOLTAGE | 24V |
| RATED CURRENT | 20A |
| CURRENT RANGE | 0 ~ 20A |
| RATED POWER | 480W |
| RIPPLE & NOISE (max.) | 150mVp-p |
| VOLTAGE ADJ. RANGE | 24 ~ 28V |
| VOLTAGE TOLERANCE | ±1.0% |
| LINE REGULATION | ±0.5% |
| LOAD REGULATION | ±1.0% |
| SETUP, RISE TIME | 1500ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load |
| HOLD UP TIME (Typ.) | 16ms/230VAC 16ms/115VAC at full load |
| INPUT | |
| VOLTAGE RANGE | 90 ~ 264VAC 127 ~ 370VDC |
| FREQUENCY RANGE | 47 ~ 63Hz |
| POWER FACTOR (Typ.) | PF>0.98/115VAC, PF>0.94/230VAC at full load |
| EFFICIENCY (Typ.) | 92.5% |
| AC CURRENT (Typ.) | 4.8A/115VAC 2.4A/230VAC |
| INRUSH CURRENT (Typ.) | 20A/115VAC 35A/230VAC |
| LEAKAGE CURRENT | |
| PROTECTION | |
| OVERLOAD | 105 ~ 130% rated output power Protection type: Constant current limiting, unit will shut down after 3 sec., re-power on to recover |
| OVER VOLTAGE | 29 ~ 33V Protection type: Shut down o/p voltage, re-power on to recover |
| OVER TEMPERATURE | Shut down o/p voltage, recovers automatically after temperature goes down |
| ENVIRONMENT | |
| WORKING TEMP. | -20 ~ +70 (Refer to 'Derating Curve') |
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing |
| STORAGE TEMP., HUMIDITY | -40 ~ +85 , 10 ~ 95% RH |
| TEMP. COEFFICIENT | ±℃ ℃ 0.03%/ (0 ~ 50 ) |
| VIBRATION | Component: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 |
