Thiết bị Gateway Polycom OBI 300 (2200-49530-001)
Part number: 2200-49530-001
- Bộ chuyển đổi VoIP kết nối điện thoại analog tại văn phòng gia đình với thế giới giao tiếp giọng nói kỹ thuật số.
- Polycom OBi300 mở rộng danh mục dịch vụ của bạn bằng cách nâng cao khả năng giao tiếp cho các văn phòng gia đình, mang lại sự linh hoạt trong các ứng dụng thoại và fax khi chuyển sang thế giới giao tiếp kỹ thuật số. Các văn phòng gia đình có thể tối đa hóa khoản đầu tư hiện tại của mình bằng cách giữ lại điện thoại hoặc máy fax analog, đồng thời trải nghiệm các khả năng mới với tối đa bốn dịch vụ VoIP. Thiết bị chuyên dụng này đảm bảo rằng khách hàng của bạn có thể nghe rõ từng lời quan trọng hoặc gửi và nhận các cuộc gọi fax đáng tin cậy qua Internet.
- Mở rộng danh mục dịch vụ của bạn bằng cách cung cấp các ứng dụng thoại và fax linh hoạt cho các văn phòng gia đình.
- Dễ dàng cấu hình thiết bị và cung cấp hỗ trợ tốt hơn thông qua cổng quản lý thiết bị Polycom OBiTALK an toàn.
- Là bộ chuyển đổi VoIP duy nhất hỗ trợ phụ kiện Wi-Fi tùy chọn, giúp mở rộng các vị trí đặt điện thoại.
- Kết nối tối đa 1 điện thoại analog hoặc máy fax để chuyển giao tiếp giọng nói sang thế giới kỹ thuật số.
Thông số kỹ thuật
| Product requirements | •Active Internet Connection • Analog Touch Tone Phone • Access to Internet Via a Switched Ethernet Port on Home or Office Router • (Optional) Active Internet Phone Service Subscription with All Required SIP Credentials to Make and Receive Calls Polycom OBi300 ships with • OBi300 Voice Service Bridge and Telephone Adapter • Power Adapter • 1 x RJ-45 Ethernet Cable (80 inches/203 centimeters) • Quick Start/Installation Guide |
| Dimensions (L x W x H) | 6.9 cm x 6.9 cm x 3.0 cm |
| Unit weight | • 198 grams/7 ounces • Shipping weight: 340 grams/12 ounces (Including Power Supply, Ethernet Cable and Packaging) |
| Interface features | • Internet (WAN): 1 x 10/100BaseT Ethernet Port (802.3) • Phone (FXS): 1 x RJ-11 FXS Analog Phone Port • USB: USB 2.0 • Reset Button: Located on Bottom of Case • LEDs: Power/Status, Ethernet Activity (WAN), Phone • LED indications: Power On, Status, upgrade in Progress Status, Packet RX/ TX, Phone Port Status |
| Telephony features | • Call Routing Rules • Automated Attendant with Configurable Answer Delay • PIN Access Control to AA (Up to 4 PINs) • Recursive Digit Map for Call Routing (AA, Phone, Voice Gateways, Trunk Groups) • AA Configurable Outbound Call Routing Rules • SIP Service Configurable Inbound Call Routing Rules • Fax Pass Through (G.711) • T.38 Fax Relay for Fax over IP • Modem Pass Through (G.711) • In-Band DTMF (G.711) • Out of Voice Band DTMF (RFC 2833) • Out of Voice Band DTMF (SIP INFO Method) • Call Progress Tone Generation • Tone Profile per SIP SP and OBiTALK Service • Ring Profile per SIP SP and OBiTALK Service • Star Code Profile per SIP SP and OBiTALK Service • Full Duplex Audio • G.165, 168 Echo Cancelation • VAD - Voice Activity Detection • Silence Suppression • Comfort Noise Generation • Three Way Conference Calling with Local Mixing • Hook Flash Event Signaling • Flash Hook Timer • Caller ID - Name and Number per Bellcore, ETSI, DTMF, and NTT • MWI - Message Waiting Indicator • Visual Message Waiting Indication (VMWI) • Daylight Savings Time Support - Worldwide • Caller ID Enable/Disable • Caller ID Number • Caller ID Name (Alphanumeric) • Caller ID Spoofing • Call Waiting • Maximum Session Control • Call Forward - Unconditional • Call Forward on Busy • Call Forward on No Answer (Ring Count Configurable) • Call Transfer Enable/Disable • Anonymous Call Block • Anonymous Call • Do Not Disturb • Call Return • Repeat Dialing |
| Data networking | • MAC Address (IEEE 802.3) • UDP (RFC 768) in SSL/TLS • TCP (RFC 793) in SSL/TLS • IP version 4, IPv4 (RFC 791) - Static IP and DHCP Support • ICMP (RFC 792) • ARP - Address Resolution Protocol • Domain Name System (DNS) A Records (RFC 1706) and SRV Records (RFC 2782) RTP (RFC 1889, 1890), RFC 5966 • RTP/RTCP (RFC 1889), DHCP Client (RFC 2131) • DiffServ (RFC 2475) - Independently Configured: Service, SIP and Media • ToS (RFC 791, 1349) - Independently Configured: Service, SIP and Media • VLAN Tagging (802.1p - Independently Configured: Service, SIP and Media • SNTP (RFC 2030) - Primary and Secondary NTP Servers • LLDP-MED |
| Security | • Local Access Interface: IVR Password • Remote Access Interface: User Name and Password Access via HTTP, TFTP - HTTPS • Device Web Page Standard: HTTP v1.1, XML v1.0 • Secure Remote Provisioning: HTTP, HTTPS |
| VoIP features | • Four (4) Service Provider Configuration Profile Assignments (ITSP 1–4) • Four (4) Service /Trunk Subscription Profile Assignments (SP 1–4) • SIPv2 (RFC 3261, 3262, 3263, 3264) • SIP over UDP • SIP over TCP • SIP over TLS • 4 SIP Service Provider Service Sessions—Concurrent Operation • 1 OBiTALK Service Session • SIP Proxy Redundancy—Local or DNS Based SVR, Primary and Secondary Fallback List Restrict Source IP Address • Maximum Number of Sessions— Independent per Service • 4 Trunk Groups • Voice Gateway—Direct Dialing • G.711 A-Law (64 kbps) • G.711 µ-Law (64 kbps) • G.726 (32 kbps) G.729a (8 kbps) iLBC (13.3, 15.2 kbps) Codec Pre-selection Code • Voice Processing per SIP Service - TX/ RX Audio Gain, Echo Cancellation • Adjustable Audio Frames per Packet • Codec Name Assignment • Codec Profile per SIP SP and OBiTALK Service • Dynamic Audio Payload • Packet Loss Concealment • Jitter Buffer (Adaptive) • STUN • ICE • SUBSCRIBE/NOTIFY Framework (RFC 3265) • NOTIFY Dialog, Line Status • SUBSCRIBE Message Summary • VoIP NAT Interworking • DATE Header Support • Remote-Party-ID (RPID) • P-Asserted-Identity (PAID) • RTP Statistics in BYE Message and SIP PUBLISH with MOS Score |
| Power | • Universal Switching with Fixed US, EU, UK Style Plug Prongs (Model Dependent) • AC Input: 100 to 240 Volts 0.3A 50–60Hz (26–34 VA) • DC Input: +12V 1.0 Amp Max |
| Certifications | • FCC Part 15 Class B • A-Tick • CE • ICES-003 • RoHS • WEEE • UL/cUL—Power Adapter |
| Environmental conditions | • Operating temperature: 0º to 45º C (32º to 113º F) • Relative humidity: 10% to 90% Noncondensing • Storage temperature: –25º to 85º C (–13º to 185º F) |
| Management - Configuration | • Local Access Interface: IVR, Web Page - Password Protected (Admin and User Level Log-in) • Remote Access Interface: Syslog (MultiLevel Granularity), Invokable via SIP Notify, Web, Provisioning • Device Web Page Standard: HTTP v1.1, XML v1.0 • Remote Provisioning: XML via TFTP or HTTP, (TR069/TR104 Parameter Naming Syntax) • Secure Remote Provisioning: HTTPS, Encrypted XML via HTTP or TFTP - Dedicated User Name and Password • Secure Remote Firmware Update: Encrypted Binary File via TFTP or HTTP + Dedicated User Name and Password • Customization: OBi-ZT: Obihai ZeroTouch Automatic Customization and Configuration • Call History (CDRs): Call Detail Records on OBi Web Page, Export to XML • LED Indications: Power, Device Status, Upgrade Progress Status, Ethernet Activity, PHONE Status • Session Information: SIP Session Status, OBiTALK Status, Phone Port Status • Primary SIP Service Set-Up Wizard: Dedicated Device Web Page for Quick ITSP Account Set-Up • System Settings Back-Up/Restore: Save and Restore Configuration via XML file to/from a Local Folder |
| RTP Statistics | • RTP Transport Type • Audio Codec Type (Tx/Rx) • RTP Packetization - in multiples of 10ms (Tx/Rx) • RTP Packet Count (Tx/Rx) • RTP Byte Count (Tx/Rx) • Packets Out-Of-Order • Packets Interpolated • Packets Late (Dropped) • Packets Lost • Packet Loss Rate % • Packet Drop Rate % • Jitter Buffer Length–ms • Received Interarrival Jitter–ms • Jitter Buffer Underruns • Jitter Buffer Overruns |
| Call Progress | • Configurable Call Progress Tone • Call Progress Tone Profiles (2) • Dial Tone • Busy Tone • Ringback Tone • Reorder Tone • Confirmation Tone • Holding Tone • Second Dial Tone • Stutter Tone • Howling Tone • Prompt Tone • Call Forwarded Tone • Conference Tone • SIT Tones (1–4) • Ringing and Call Waiting Tone Configuration • Ring Patterns (10)-Configurable • Call Waiting Tone Patterns (10) - Configurable • Call Waiting Tone Pattern Profiles (2) |
| Star Code Configuration | • Configurable Star Codes • Star Code Profiles (2) • Redial • Call Return • Activate Block Caller ID • Deactivate Block Caller ID • Block Caller ID Once • Unblock Caller ID Once • Activate Call Forwarding (All Calls) • Deactivate Call Forwarding (All Calls) • Activate Call Forward on Busy • Deactivate Call Forward on Busy • Activate Call Forward on No Answer • Deactivate Call Forward on No Answer • Activate Block Anonymous Calls • Deactivate Block Anonymous Calls • Activate Call Waiting • Deactivate Call Waiting • Activate Do Not Disturb • Deactivate Do Not Disturb • Activate Repeat Dial • Deactivate Repeat Dial |
| FXS SLIC (Subscriber Line Integrated Circuit): Phone Port | • Ringer Specifications: Ring Frequency: 14Hz–68Hz, Ring Waveform: Trapezoidal, Sinusoidal, Ring Voltage: 55v–85v • Maximum Ring Load: 5 REN (Ringer Equivalence Number) per Phone Port |
| FXS (PHONE Port) Configuration Settings | • Recursive Digit Map and Associated Outbound Call Routing • On-Hook Tip Ring Voltage: 30v–52v • Off-Hook Current Max: 15mA–45mA • Impedance: 12 Independent Settings • DTMF Playback Level: –90 dBm–3 dBm • Caller ID Method: Bellcore, ETSI (FSK or DTMF) • Caller ID Trigger (Before/After First Ring, Polarity Reversal) • Channel Tx Gain: –12dB to 6 dB at 1 dB Resolution • Channel Rx Gain: 12dB to 6 dB at 1 dB Resolution • Silence Detect Sensitivity • Hook Flash Time Max • Hook Flash Time Min • CPC Delay Time • CPC Duration • Idle Polarity • Connect Polarity |
- Bảo hành: 24 tháng.
