480W 48VDC DIN Rail Power Supply Unit D-Link DIS‑N480‑48
- Universal AC input/ Full range.
- Built-in active PFC function.
- Protections: Short circuit/ Overload/ Over voltage/ Over temperature.
- Cooling by free air convection.
- Can be installed on DIN rail TS-35/7.5 or 15.
- UL 508 (industrial control equipment approved.
- EN61000-6-2 (EN50082-2) industrial immunity level.
- 100% full load burn-in test.
Specifications
| Model | DIS‑N480‑48 |
| OUTPUT | |
| DC VOLTAGE | 48V |
| RATED CURRENT | 10A |
| CURRENT RANGE | 0 ~ 10A |
| RATED POWER | 480W |
| RIPPLE & NOISE (max.) | 150mVp-p |
| VOLTAGE ADJ. RANGE | 48 ~ 55V |
| VOLTAGE TOLERANCE | ±1.0% |
| LINE REGULATION | ±0.5% |
| LOAD REGULATION | ±1.0% |
| SETUP, RISE TIME | 1500ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load |
| HOLD UP TIME (Typ.) | 16ms/230VAC |
| 16ms/115VAC at full load | |
| INPUT | |
| VOLTAGE RANGE | 90 ~ 264VAC |
| 127 ~ 370VDC | |
| FREQUENCY RANGE | 47 ~ 63Hz |
| POWER FACTOR (Typ.) | PF>0.98/115VAC, PF>0.94/230VAC at full load |
| EFFICIENCY (Typ.) | 92.50% |
| AC CURRENT (Typ.) | 4.8A/115VAC |
| 2.4A/230VAC | |
| INRUSH CURRENT (Typ.) | 20A/115VAC 35A/230VAC |
| LEAKAGE CURRENT | |
| PROTECTION | |
| OVERLOAD | 105 ~ 130% rated output power |
| Protection type: Constant current limiting, unit will shut down after 3 sec., re-power on to recover | |
| OVER VOLTAGE | 56 ~ 65V |
| Protection type: Shut down o/p voltage, re-power on to recover | |
| OVER TEMPERATURE | Shut down o/p voltage, recovers automatically after temperature goes down |
| ENVIRONMENT | |
| WORKING TEMP. | -20 ~ +70 (Refer to 'Derating Curve') |
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing |
| STORAGE TEMP., HUMIDITY | -40 ~ +85 , 10 ~ 95% RH |
| TEMP. COEFFICIENT | ±0.03 %/℃ (0 ~ 50) |
| VIBRATION | Component: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 |
| GENERAL | |
| Power Supply | 100 ~ 240 VAC |
| Dimensions (W×D×H) | 380 × 315 × 53 mm |
| Weight (without HDD) | ≤2.6kg |
