18-port 1.25G Layer 2 Managed Switch G-NET G-MES-18GX6GC-4XG
- G-NET G-MES-18GX6GC-4XG is standard layer 2 non-blocking switch. Based on high-performance ASIC chip technology, the modular structure design, which have a capability of multilayer switching and wire-speed routing forwarding. Can be deployed in the metropolitan area network, and provides a few last 1km technology to gather and core data exchange. At the same time, G-MES-18GX6GC-4XG provide a complete IPv4/IPv6 routing, including tunnel and IP multicast. The user can set all kinds of functions of switch through the Web, SNMP and so on. G-MES-18GX6GC-4XG support layer 2 VPN, DOS defense, static routing, RIP, OSPF, BGP, PIM-SM, PIM-DM, DVMRP, NAT, Qos, RSTP, MSTP, VLAN, Port Security, a storm suppression, ACL access control and other functions, which is very suitable for the aggregation application of large-scale network and the core application of medium and small-sized network.
Đặc tính kỹ thuật
| Fixed port | 18 x 1.25G Ports + 6 x Gigabit RJ45/1.25G SFP Combo Ports + 4x10G SFP + Ports + 1 x Console |
| Backplane bandwidth | 128Gbps |
| Packet forwarding rate | 95.232Mpps |
| Processor | RISC 400MHz |
| Flash memory capacity | 8MB |
| The memory capacity | 128MB |
| Address table | 32K |
| Product characteristics | |
| Spanning tree | Support STP, RSTP, MSTP Support PVST/PVST+ |
| VLAN | Support port-based VLAN Support MAC-based VLAN Support 802.1Q labeled VLAN Support for Super Vlan Support for Private Vlan Support for the GVRP dynamic VLAN configuration Support QinQ and flexible QinQ Support for Voice VLAN |
| Flow control | Based on a standard IEEE 802.3x flow control Using IEEE 802.1Qbb priority flow control Support CAR function |
| Broadcast control | Restraining broadcast storm, stop sending so long as reaching a critical point |
| Multicast control | IGMP Snooping multicast message automatic monitoring |
| Multicast routing | IGMP v1/v2/v3, MLDv2 PIM-SM, OLINK&PIM-DM DVMRP (Distance Vector Multicast Routing Protocol) GMRP (multicast dynamic registration protocol) |
| Port binding | Each group of a maximum of 8, while support 128 group LACP dynamic or static polymerization |
| Port mirroring | Support based on flow classification mirroring and port mirroring |
| Stacked | Stacked 16 hard, soft stacking 32 Using clustering techniques, with a unified centralized management of IP address to do address resource saving |
| Routing management | Static routing RIP v1/v2, OSPFv2, BEIGRP (compatible with Cisco EIGRP), BGPv4, ISIS, BGP Anti virus intelligent routing function |
| Strategy routing | Support based on IP strategy routing |
| The proxy function | Support Proxy ARP, DNS Proxy |
| Redundancy backup | Support for VRRP, HSRP Hot Standby Router Protocol |
| Characteristics of DHCP | DHCP Server, DHCP Client and support DHCP relay |
| Function of NAT | Support the static or dynamic NAT address translation function |
| Safety characteristics | IEEE 802.1x port certification, PKI certification Port Security (Port Security) function Hardware support for IP ACL ACL ACL, MAC, Vlan Hardware support for port based user IP+MAC+Vlan ID+ user account a variety of factors combined to bind Support IP Source Guard Support WEB interface user authentication Remote RADIUS, TACACS+ certification User classification management and password protection Net shield technology Safety control technology Policy control list |
| Quality of service | IEEE 802.1Qau congestion mechanism Each port 8 send queue mapping 802.1p 8 priority WRED, WFQ, SP and FIFO queue scheduling algorithm Best-Effort Service Differentiated Service Strict Priority Weighted Round Robin First come first served TOS to mark RTS |
| Network management | SNMP v1/v2/v3 RMON (1, 2, 3, 9 group) Telnet WEB interface Support for cluster management Support SSH Support for PDP (compatible with Cisco CDP.) To support the fan, temperature, system log, hierarchical alarm |
| Physical characteristics | |
| Appearance size | 442 × 285 × 44 mm |
| Power characteristic | AC 110-240V adaptive, 47-63Hz, 1A/230V, RPS power hot backup |
| Power | 80W |
| Indicator lamp | Power indicator, indication of system, connecting/transceiver instructions |
| Environment humidity/temperature | 0-50 ℃ operation, -40-70℃ preservation, 0-90% no condensation |
