Hỗ trợ kinh doanh

Ms. Linh: 0918 489 013
Ms. Lê: 0916 514 469
Ms. Oanh: 0918 489 023
Ms. Nhi: 0918 891 771
Ms. Quỳnh: 028-7300 1535
Ms. Thảo: 028-3588 6355
Ms. Vân: 0914 801 001
Ms. Tuyết: 0915 762 088

Hỗ trợ bảo hành kỹ thuật

(028) 73 00 20 49

Chăm sóc khách hàng

0916 287 068

Photoelectric Beam Sensor Outdoor TAKEX PB-100HF-KH

Trang Chủ >> Báo cháy-Báo trộm >> Báo động TAKEX >> Photoelectric Beam Sensor Outdoor TAKEX PB-100HF-KH
Mã số:13304482
Photoelectric Beam Sensor Outdoor TAKEX PB-100HF-KH

Photoelectric Beam Sensor Outdoor TAKEX PB-100HF-KH

- 4 Synchronized High Power Infrared:

   + 4 beams are 'and-gated', which helps to prevent false alarms from falling leaves and small animals.

   + The active infrared transmission is exceptionally strong with a maximum arrival distance ten times greater than the specified protection distance.

   + External light compensation circuit provides excellent tolerance against sun light, automobile head lights, fluorescent light or mercury light.

- Four Frequencies Selections: 4 separate choices of frequency avoids cross-talk in stacked or long linear installations.

- Beam Transmission Strength Selection: 2 levels of beam transmission strength which can be set to suit the protection distance.

- Easy Beam Alignment

   + Audible signal for alignment: An alignment tone aids in quick set-up to beams. The tone becomes maximum at peak of beam level.

   + Sensitivity attenuation LED: Lights when beam level is attenuated, which shows low sensitivity.

   +  Monitor jack output.

- Auto-Gain Lock: Optimal sensitivity gain is automatically set at any coverage distance up to the maximum protection distance. Auto-Gain lock is easily confirmed by sound check.

- Programmed Agc: Sensitivity is automatically increased in bad weather to contend with fog, heavy rain, frost or snow.

- Alarm Memory: Alarm memory LED located on receiver can be automatically reset (flickering 5 min. after an alarm and auto-reset 55 min. after that) or manually controlled.

- Environmental Module Built-In: Environmental trouble signal is sent when beam reception level is reduced below an acceptable level.

- Other Features

   + Wide adjustment (horizontally +/-90°, vertically +/-10°).

   + Target color.

   + Optional accessories.

Thông số kỹ thuật

Model PB-100HF-KH
Type Photoelectric beam sensor
Protection distance 330ft. (100m) or less
Max. arrival distance 3300ft. (1000m) (tenfold margin distance)
Infrared beam LED (pulsed beam by LED)
Double modulation
Detection system Photoelectric beam
Response time 0.05sec. to 0.7sec. (Variable at pot)
Alarm signal Dry contact relay output N.O. / N.C.
Contact action : Interruption time + delay time (approx. 2sec.)
Contact capacity : 30V (AC/DC) 1A
Environmental signal Dry contact relay output N.O. / N.C.
Contact capacity : 30V (AC/DC) 0.5A
Supply voltage 12 to 30V DC
Power consumption When alarmed 70mA or less
- Transmitter : 25mA or less
- Receiver : 45mA or less
When adjusted 105mA or less
Functions Alignment tone switch, Attenuation LED, Monitor jack,
Alarm memory function Four channel frequency selection.
Environmental check, Automatic gain control (AGC) circuit,
Weight Transmitter 10.6oz (300g) Receiver 14.1oz (400g)

Xuất xứ: Nhật Bản.

- Bảo hành: 18 tháng.

Giá: 6.864.000 VND (Đã bao gồm VAT)

Số lượng :

Thêm vào giỏ Mua ngay


Chia se tren Facebook
Sản phẩm liên quan

Tel:(028) 7300 1535
Showroom:92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM
Website:www.sieuthivienthong.com
Email:info@sieuthivienthong.com