Actuator THEBEN HM 12 T KNX

Trang Chủ >> Báo cháy-Báo trộm >> Công tắc cảm ứng THEBEN >> Actuator THEBEN HM 12 T KNX
Mã số:13130143
Actuator THEBEN HM 12 T KNX

Actuator THEBEN HM 12 T KNX

- 12-way heating actuator FIX2.

- With 12 temperature controllers (P/PI) for heating and cooling.

- For controlling 12 thermal actuators 24 V - 240 VAC in 4 groups with 3 outputs and 450 mA each.

- (Due to the switch-on behaviour of the actuators, we recommend not to exceed a maximum load of 3x1 actuators 24 VAC or 3x5 actuators 230 VAC).

- Short-circuit-proof and overcharge protected.

- Continuous or switching actuating value selectable.

- Valve protection function can be deactivated.

- With the modes: Comfort, standby, night as well as frost/heating protection.

- Changeover to summer mode possible.

- LED switching status display for each channel.

- Manual operation on device (even without bus connection).


Model HM 12 T KNX
Operating voltage KNX Bus voltage,
Operating voltage 110 – 240 VAC
Stand-by consumption ~0,5W
Frequency 50 – 60 Hz
Number of channels 12
Installation type DIN rail
Width 8 modules
Type of connection Terminal screws | Bus connection: KNX bus terminal
Max. cable cross section Solid wire: 0.5 mm² (Ø 0.8) to 4 mm² | Stranded wire with end sleeve: 0.5 mm² to 2.5 mm²
Switching output Not potential-free
Output Triac, 0,45 A
Voltage output 24 VAC - 240 VAC
Frequency output 50 – 60 Hz
Suitable for SELV Yes if all channels switch at SELV
Switching of various phases Possible
Ambient temperature -5°C … +45°C
Type of protection IP20
Protection class II according to EN 60 669

- Hãng sản xuất THEBEN của Đức.

- Bảo hành: 12 tháng.


Giá: Vui lòng gọi

Số lượng :

Thêm vào giỏ Mua ngay

Chia se tren Facebook
Sản phẩm liên quan

Tel:(028) 7300 1535
Showroom:92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM