Hỗ trợ kinh doanh

Ms. Linh: 0918 489 013
Ms. Lê: 0916 514 469
Ms. Oanh: 0918 489 023
Ms. Tuyết: 0915 762 088
Ms. Quỳnh: 028-7300 1535
Ms. Thảo: 028-3588 6355
Ms. Nhi: 0918 891 771
Ms. Vân: 0914 801 001

Chăm sóc khách hàng

0916 287 068

Photoelectric Beam Sensor TAKEX PXB-100ATC

Trang Chủ >> Báo cháy-Báo trộm >> Báo động TAKEX >> Photoelectric Beam Sensor TAKEX PXB-100ATC
Mã số:13305229
Photoelectric Beam Sensor TAKEX PXB-100ATC

Photoelectric Beam Sensor TAKEX PXB-100ATC

- Upper and lower beams individually detect objects.

- The alarm output can be selected OR-gate (blocking either upper or lower beam) or AND-gate (blocking both upper or lower beam) according as a site.


- Anti-Crawl Detection: Upper and lower beam individually detects the objects and issues a signal only by blocking each beam.

- At . Hf Separate Output

   + AT output: OR-gated by upper and lower beam.

   + HF output: AND-gated.

- Synchronized High Power Beam: By synchronizing the timing of transmitting and receiving beam, the stacking system will be more reliable.

- Double Modulation

   + Double modulated beams are designed to distinguish the true beam signal from accidental or deliberate interference from sunlight, car headlights and other artificial light sources.

   + This increases the reliability in the outdoor security system.

- Quad High Power Beam

   + The beam power is 100 times of the minimum requirement.

   + The beam distance is 10 times of the described specification.

   + This high power beam also realizes the reliability against the harsh conditions like fog, snow, heavy rain.

- Ecology: RoHS adapted - Environment friendly. Free from Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyl, Polybrominated diphenyl ether.

- Insect/Water Prevent: IP65 rated, with anti-insect bushing and special wading.

- Anti-Bird Spike: Keeps birds and small animals away from the sensor, helping to reduce false alarms.

- Drip-Proof Housing: Prevents rain and snow from streaming down the front side of housing, helping to avoid false alarm.

- Dual Ring Sight: Enables better and clear view for easy beam alignment.

- Target Color

   + The vivid color of the internal structure can be recognized easily from the far end in the beam alignment procedure.

   + The color differs between a transmitter and a receiver which helps easy installation and checking.

- Increased Range Adjustment Allowance

   + Vertically ±20°compared with previous version.

   + It may adapt to the slope installation flexibly.

- Wireless Alignment Checker: Enables easy and accurate beam alignment.(Sold separately).

- Lightning Protection

   + Minimizes the damage caused by induced lightning through wiring.

   + Rated up to 10,000V under normal mode and 15,000V under common mode.


Model PXB-100ATC
Detection system Near infrared pulsed beam interruption system
(Anti-crawling, Anti-corrosion)
Infrared beam Double modulation pulsed beam by LED
Protection distance Outdoor 330' (100m) or less
Response time AT output : 0.05sec by upper/lower level simultaneous interruption 0.1/0.2/0.3/0.5sec by either level interruption
HF output : 0.05sec by upper/lower level simultaneous interruption
Power supply 12 to 30V DC (Non-polarity)
Current consumption Transmitter: 27mA Receiver: 48mA
Alarm output Dry contact relay output N.O./N.C. selectable
Contact action: Interruption time (Min.2sec.)
Contact capacity: 30V (AC/DC) 0.25A (resistive load)
Protective resistor
Environmental output Dry contact relay output N.O./N.C. selectable
Action: Activated when weather condition gets worse (Min.5sec.)
Contact capacity: 30V (AC/DC) 0.25A (resistive load)
Protective resistor
Tamper output Dry contact (N.C.)
Action: Activated when cover is detached
Contact capacity: 30V (AC/DC) 0.1A (resistive load)
Protective resistor
Alarm LED Red LED (Receiver) ON: when an alarm is initiated
Attenuation LED Red LED (Receiver) ON: when beam is attenuated
Ambient temperature range -31゚F to +151゚F(-35 to +66℃)
Beam adjustment Horizontal: ±90°, Vertical: ± 20°
Functions Modulated beam frequency selection,Tone indicator, Environmental module, Beam power selection, Transmitting power adjutment, Programmed AGC, Auto-gain lock function, Monitor Jack, Tamper, Response time adjustment, Upper/lower beam switch Wireless checker
Mounting positions Outdoor, Indoor
IP rating 65
Wiring Terminals
Weight Transmitter : 49oz (1,400g) Receiver : 52.5oz (1,500g)
Appearance PC resin (wine red)

- Bảo hành: 12 tháng.

Giá: 12.740.000 VND (Đã bao gồm VAT)

Số lượng :

Thêm vào giỏ Mua ngay

Chia se tren Facebook
Sản phẩm liên quan

Tel:(028) 7300 1535
Showroom:92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM