Hỗ trợ kinh doanh

Ms. Linh: 0918 489 013
Ms. Lê: 0916 514 469
Ms. Tuyết: 0915 762 088
Ms. Hiên: 028-73001535
Ms. Tuyền: 028-7300 1535
Ms. Thảo: 028-3588 6355
Ms. Vân: 0914 801 001

Chăm sóc khách hàng

0916 287 068

Low Current Photoelectric Beam Sensor Outdoor TAKEX PB-IN-75SW

Trang Chủ >> Báo cháy-Báo trộm >> Báo động TAKEX >> Low Current Photoelectric Beam Sensor Outdoor TAKEX PB-IN-75SW
Mã số:13300222
Low Current Photoelectric Beam Sensor Outdoor TAKEX PB-IN-75SW

Low Current Photoelectric Beam Sensor Outdoor TAKEX PB-IN-75SW

- Synchronized High Powered Beams

   + 100 times sensitivity margin and 10 times distance margin by using double modulation and Phase Locked Loop (PLL) circuit (patented).

   + External light compensation circuit provides excellent tolerance against sun light, automobile, flourescent and mercury lights.

   + Upper and Lower beams are 'and-gated', which helps to prevent false alarms from falling leaves and small animals.

- Four Frequencies Selection: 4 separate choices of frequency avoids cross-talk in stacked or long linear installations.

- Low Current Consumption

   + Low current consumption design for use with solar panels and low current output control panels.

   + Under 6mA when used DC6V. (approx. 3.7mA for transmitter only).

- Receiving Level Indication Function

   + Sensitivity attenuation LED Lights when beam is attenuated: Convenient for checking sensitivity margin after putting cover on.

   + Monitor jack output: Tester to measure receiving level is available on the market, therefore axis adjustment can be done correctly.

- Response Time: Response time can be field advised from 50ms-700ms.

- Protection Against Frost/Dew: Special front cover hood design prevents false alarms when the cover is coated with frost or dew.

- Environment Monitor: Annunciation by relay output of specific low signal level due to fog, rain or snow.

- Design Features

   + Extensive Beam alignment adjustment (Horizontal +/-90°, Vertical +/-10°).

   + Tamper output for high security.

   + Strong PC resin used for cover.

   + Automatic gain lock.

Thông số kỹ thuật

Name Low current photoelectric beam sensor
Model PB-IN-75SW
Detection system Near infrared beam interruption system (TR,-RE, beams simultaneous interruption)
Infrared beam Double modulation pulsed beam by LED
Protection distance Outdoor 250ft (75m) or less
Max. arrival distance Tenfold 2500ft (750m)
Response time 50m sec. to 700m sec. variable (standard 50m sec.)
Power supply 5V to 8V DC or 10V to 30V DC (with-polarity)
Power consumption 5V to 8V DC: 6mA(TR. side 3.7mA) or less when armed
10V to 30V DC: 25mA(TR. side 15mA) or less when armed
Alarm output Dry contact relay Form C
Action: Interruption time + off-delay 2 secs.
Contact capacity: 30V (AC/DC) 1A
Environment output Dry contact relay Form C
Action: an output when environment causes low signal level
Contact capacity: 30V (AC/DC) 0.5A
Tamper output Dry contact relay Form B
Action: trigger an output when cover is opened
Contact capacity: 30V (DC) 0.1A
Alarm LED Red LED (receiver) lights on when an alarm is initiated
Sensitivity attenuation LED Red LED (receiver) lights on when beam reception is attenuated
Operation LED Green LED (transmitter) lights on when cover is opened with power on
Additional functions Four frequencies selection
Environmental fade out monitor
Beam strength monitor output
Beam alignment adjustment Horizontal : +/-90°, Vertical : +/-10°
Ambient temperature range -13F to +140F (-25C to +60C)
Installation Outdoor
Wiring M3 self-up terminals
Weight Transmitter: 42oz (1200g)
Receiver: 45.5oz (1300g)
Appearance PC resin (wine red)

- Xuất xứ: Nhật Bản.

- Bảo hành: 12 tháng.

Giá: 8.944.000 VND (Đã bao gồm VAT)

Số lượng :

Thêm vào giỏ Mua ngay


Chia se tren Facebook
Sản phẩm liên quan

Tel:(028) 7300 1535
Showroom:92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM
Website:www.sieuthivienthong.com
Email:info@sieuthivienthong.com